- Three high speed steel auto-set knives automatically align themselves in the cutterhead.
- 66" long adjustable infeed and outfeed tables provide more working surface.
- Built-in ledge for 1/2" rabbeting capacity.
- Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts.
- Fence controls are center ed for convenience.
- Fine/quick adjustment lever on infeed table for precision cuts.
- Push button switch is lockable to prevent accidental starting.
Product Description
-------------------
The Powermatic 54A jointer features three auto-set knives that
align themselves in the cutterhead for rapid changes.
Oversized infeed/outfeed tables are ed on dovetailed ways
and have a built-in rabbeting ledge. The fence is 38" in length,
with positive stops at 90° and 45° right and left. The fine/quick
adjustment lever on the infeed table offers quick set-ups with
precision controlled depth of cut. The heavy steel stand features
a powerful motor with a non-slip v-belt drive for maximum
performance. The 4" dust port offers easy connection to any dust
collection system.
.com
----
The Powermatic 54A Six-Inch Jointer makes it easy to achieve the
high levels of accuracy you need when creating flat, straight
surfaces for elegant projects. Designed and built to provide
precision and dependability, this jointer boasts a cutter-head
with "Quick Set" system and heavy-duty construction for
years of powerful performance.
Powerful Motor and Stable Design
Measuring 21 x 13 inches (W x D), the all-steel base cabinet
provides stable footing for the Powermatic 54A and puts the table
surface at a comfortable 32 inches above the floor.The
one-horsepower, one-Ph, 115-volt motor is ed within the
cabinet and can be converted to use 230-volt power. It's also
located on a special within the base cabinet for easy
belt-tension adjustments.
The base contains a dust collection chute that evacuates debris
from below the cutter-head and guides the debris to the exterior
four-inch diameter port near the floor for less mess, better air
quality, and improved visibility of the work piece.
Three- Cutter-Head for Smooth Cuts
The Powermatic 54A features a three- cutter-head fitted with
adjustment cams that make setting heights both easy and
accurate.
Each is made from high-quality steel for long-lasting
performance. And since the knives are secured by a set of four
gib screws and a gib plate, they are easy to change and set.
Generous Table Size and Easy Adjustability
With a width of 7-1/4 inches and length of 66 inches, the
Powermatic 54A has the longest tables available in its class, so
it provides plenty of support for large work pieces.
The tables are precision ground to ensure flatness, and each is
ed on dovetailed ways that keep them aligned through height
changes. For added convenience, you can adjust the out-feed table
height via a hand wheel ed below the table.
Additionally, an easy-to-read scale on the front side of the
in-feed table allows quick and precise setting of specific cut
changes, and a finger-operated gib screw locks the table in
position once it is set.
Precisely Ground Fence
Like the tables, the cast-iron fence system is precisely ground.
It tilts up to 45 degrees towards and away from the tables. Fully
adjustable stops at 90 degrees (vertical) and each 45-degree
position make setup fast and help keep the Powermatic 54A
accurate.
For added convenience, the fence controls are center ed, and
a push-button switch is lockable to prevent accidental starting.
The Powermatic 54A is backed by a five-year warranty.
What's in the Box
One Powermatic 54A, one jointer stand, one door with ing
hardware, one dust chute with ing hardware, one jointer
assembly, one fence assembly, one pulley cover, one belt, one
cutter-head guard, two hold-downs, one hardware bag, one fence
handle, all necessary tools, manual, and warranty card.
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
From the Manufacturer
---------------------
This is the same great Powermatic Model 54A 6" jointer except it
has the NEW Quick-Set knives that make for very quick, very
accurate and very easy knive replacement. You still have the the
1hp, 1ph motor and the center ed cast iron fence assembly
along with the very large 66" x 7 1/4" table surface. The fence
has positive stops at 90 and 45 degrees and you still get the
1/2" rabbeting capacity. The fine/quick adjustment lever on the
infeed table offers quick set-ups with precision depth of cut.
The heavy steel stand contains the powerful motor with a non slip
V-belt for maximum performance. The 4" dust port offers easy
connection to any dust collection system.
See more ( javascript:void(0) )