- 200V-240V Input, Metered 1Ph 30A rack Power Distribution Unit.
- Input: NEMA L6-30P (5.0 kW).
- Output Receptacles: Thirty-Six (36) C13 Outlets, and six (6) C19 Outlets.
- 0U Vertical ing PDU.
- Cord Length: 9.8 feet.
Product Description
-------------------
APC AP8841 Rack PDU 2G/ Metered/ Zero U/ 30A/ 208V Surge
Protector
From the Manufacturer
---------------------
Superior Equipment and Data Protection
--------------------------------------
Why buy APC by Schneider Electric?
----------------------------------
Over the years, APC by Schneider Electric has received hundreds
of awards worldwide - more than any other power protection
manufacturer. Such designations have recognized APC by Schneider
Electric for both its reliable solutions and its overall business
performance.
RACK PDU 2G, METERED, ZEROU, 30A, 200/208V, (36) C13 & (6) C19
-----------------------------------------------------------------
Metered rack PDUs provide real-time remote monitoring of
connected loads. User-defined alarms warn of potential circuit
overloads before critical IT failures occur.
APC by Schneider Electric Metered Rack Power Distribution Units
(PDUs) provide active metering to enable energy optimization and
circuit protection. User-defined alarm thresholds mitigate risk
with real-time local and remote alerts to warn of potential
circuit overloads. Metered Rack PDUs provide power utilization
data to allow Data Center Managers to make informed decisions on
load balancing and right sizing IT environments to lower total
cost of ownership. New AP8000 series Metered Rack PDUs include
real power monitoring, a temperature/humidity sensor port,
locking IEC receptacles, and ultra low profile circuit breakers.
User-defined alarms warn of potential circuit overloads before
critical IT failures occur. Users can access, configure, and
control Switched Rack PDUs through secure Web, SNMP, Command Line
Interface, or Telnet Interfaces which are complimented by
Schneider Electric's StruxureWare solution.
Metered Rack PDU Features & Benefits Availability Remote
Management Capabilities Full-featured network management
interfaces that provide standards-based management via Web, SNMP,
and Telnet. Allows users to access, configure, and manage units
from remote locations to save valuable time. Associated with this
feature is the ability to quickly and easily upgrade the firmware
via network download to installed units for future product
enhancements. Local Current Monitoring Display The aggregate
current draw per power distribution unit is displayed on the unit
via a digital display. The local digital display helps installers
avoid overloaded circuits by providing a visible warning when the
current draw is close to the maximum amperage draw of the strip.
Alarm Thresholds Remotely manage outlets so users can turn
outlets off that are not in use (prevent overloads) or recycle
power to locked-up equipment (minimize costly downtime and avoid
travel time to equipment). Alarm Thresholds Define alarm
thresholds in order to avoid overloaded circuits. Network and
visual alarms inform the user of possible problems. (Note: Only
available on units with the current monitoring capabilities.
Please see SKU specifications for availability) Load indicator
LED Indicates overload and warning conditions based on the
user-defined alarm thresholds. Alerts users of potential
overloaded circuits. Flash Upgradeable Quickly and easily upgrade
firmware via network download for future product enhancements.
Eliminates the need to replace products already installed in the
field when new features are released. (Note: Networked units
only)
Technical Specifications Output Nominal Output Voltage 208V
Maximum Total Current Draw per Phase 24A Output Connections (36)
IEC 320 C13 (6) IEC 320 C19 Overload Protection Yes Input Nominal
Input Voltage 208V Input Frequency 50/60 Hz Regulatory Derated
Input Current (North America) 24A Input Connections NEMA L6-30P
Cord Length 2, 74 meters Number of Power Cords 1 Acceptable Input
Voltage 200-240 VAC Maximum Input Current per phase 30A Physical
Net Weight 6.84 kg Maximum Height 1791.00 mm Maxiumum Width 56.00
mm Maximum Depth 44.00 mm Shipping Weight 8.47 kg Shipping Height
2000.00 mm Shipping Width 162.00 mm Shipping Depth 107.00 mm
Color Black Environmental Operating Environment -5 - 45 °C
Operating Relative Humidity 5 - 95% Operating Elevation 0 - 3000
meters Storage Temperature -25 - 65 °C Storage Relative Humidity
5 - 95% Storage Elevation 0 - 15,000 meters Conformance
Regulatory Approvals CSA C22.2 No. 60950, IEC 60950, METI Denan,
UL 60950-1, VDE Standard Warranty 2 years repair or replace
Sustainable Offer Status RoHS Compliant REACH REACH: Contains No
SVHCs Battery Directive Compliant Battery Notes Contains Lithium
Battery