Front Load Washer Tub Bearings and Seal Kit for LG & Kenmore Etc,Replacement Part 4036ER2004A 4280FR4048L 4280FR4048E(MAP61913707) 4036ER4001B- 5 YEARS WARRANTY by TOMOON

I’ve had these bearings installed for just short of a month and they have performed exceptionally!My LG washer is a bit over 10 years old and the original bearings and seal had never been replaced. The inner drum had quite a bit of free play and sounded like a fighter jet anytime the machine would do a spin cycle. Upon taking everything apart, I did find that the bearings were terribly damaged because the original seal had failed and let water into them. The spider assembly also had some marring, so I knew that I would need to do this job again with a new spider at some point. Given this information, I opened these new bearings and packed them with automotive heavy duty grease. From the factory these bearings don’t have much grease in them, so I would recommend doing this regardless. Additionally, I put the new bearings in my freezer while I finished preparing the drum for installation. Putting them in the freezer helped them fit right in with minimal mechanical persuasion.Overall, I am happy with the purchase and will update should the bearings fail. So far after a month, everything has been great!

Seller stands behind product. I got a warranty 1-1/2 years after use / purchase. I would have opted for higher quality bearings if available because the removal job is difficult compared to the cost of the bearings.I have an ~10 year old LG Direct Drive washer which has had the ‘all plastic rotor hub’ (4413ER) replaced many times. I assume that’s due to an engineering mishap on LG’s behalf since they upgraded the dampening ‘all plastic hub’ with a metal insert one that hasn’t failed yet. Only problem with that is it puts pulsation from the Direct Drive VFD’s magnetic forces directly on the bearings. I think this causes seal fatigue and the bearings to fail prematurely. I have to give TOMOON / wsh supplier credit as they did stand behind their "5 YEARS WARRANTY". They shipped a whole rebuild kit under warranty very quickly. Thank you TOMOON you earned my 100% 5 star review.

They are cheap and do work. Install was ardous but doable. However, 15 months later the bearing is for sure shot. Do not buy. This is what they look like after 18mobths. Completely shot

This was well worth the time. It takes a little time but it runs like new for $30.00.

Buenos

Mine was noisy, so I assumed it was just the bearing, but I bought this kit to do it all while I was in there. Glad I did. The seal had failed just enough to corrode stuff. Also, the tub didn't leak, but when I split it open, the gasket shrunk and split. After disassembly, I also found the tub support (Spider) was garbage because the seal surface was completely corroded.

The shipping was fast and the packaging was of good quality. It was the right size for the job. My husband helped with the installation and everything went smoothly. Now let's see if they last longer than a year.

Product arrived as described & in short order. Unfortunately I had to return it because by the time I got to that part, everything else was already destroyed. Returning said parts was hassle free & easy peasy.