Muzata6Pack 3.3FT/1M Excellent Spotless LED Channel System with Milky White Cover Black Aluminum U Shape LED Strip Diffuser Channel U108 BW 1M

I was exploring a way to run my own LEDs under my new couch, with a method to make it look as if it came with the couch. After checking some ideas on Reddit, I found these channels. I took a rough measurement of the linear footage, and ordered the quantity based on that.Not only is the quality of these channels top notch, they are easy enough to work with for probably most setups. Pretty cool they come with pop-in diffusers for the older type of LEDs. Opted to not use them for my own setup, but kept them in case I change my mind.This project wouldn't have been possible without these channels! The description was spot on, I was able to determine my LED strip would fit in the channel fairly easily. If I had to do it all over again, I'd go this same route.

WARNING! I struggled for 20 minutes trying to put the diffuser into the track before I discovered it was NOT the correct size. There were two different sized diffusers delivered to me. Hard to get good photos. Pictures above show the one that is too wide and the another photo shows the one that fits fine. I know you’re probably saying just squeeze it in. Well the diffuser is made well. The wide one does not flex at all. The smaller one flexes just enough to get it together. Too late to get a refund on that. Once matched up the diffuser did fit in but still not as easy as I would expect. Final product looks ok but I wouldn’t go with this setup again.

Easy to install, sturdy and looks really good!!!

these diffuse fairly well as long as you adhere the led strip to the channel (mine friction fit but still hung too low, so I hot glued then) - but the diffusers are nearly impossible to get on, each one took me at least 30 minutes to press in... definitely do not put them up before adding the diffusers, would order different ones next time

I was looking for a channel to hide the LEDs to make them “seamless” or “dot less”. When searching I needed to find the right diffuser shape and found this was the best to help with that neon look. Very easy to install on my wall. And with the LED lights inside and mounted it’s a great accent piece. One thing I wish is that it was a tad wider of a product to help with diffusion. But still, a grea product if you’re trying to have that neon look.

I wanted these to make my 60LED/M strips have the neon appearance. I can confirm these tracks will do the job at this density. I tried some 30/M strips and I could still see some dots, but it was an improvement over other tracks I have used in the past. I am dropping 1 star only because these do reduce the amount of light that gets through. Not severely, but a bit more than other thinner covers do. There wasn't much of a mention of that in the product description. I am using my strips for baseboard lighting down a 20 foot long hallway and these will do nicely for that task. The LED strips I am using are these which I am also very happy with.https://www.amazon.com/dp/B01D1I50UW?psc=1&ref=ppx_yo2ov_dt_b_product_detailsJust know these higher density LED strips need more power than most of the wall warts will provide. My 16.4' strip will draw nearly 4 amps with all LEDs lit at full brightness. Make sure your controller and your power supply is rated for the total power you intend to connect. YOu may need some LED amplifiers if you connect multiple strips up.

Like many other reviewers, the channels I received were woefully out of tolerance. All but one of the diffusers were simply too big to fit in the aluminum channel. I suspect this is from poor tolerances rather than simply being a mismatch of two different parts, because exactly one of the diffusers and one of the channels were actually within the same tolerances and were usable. Is this indicative of the "quality" of the Muzata brand?

I used them to make a nice looking mirror led. They are really nice and look good. At $50 for 20 feet they feel a little pricey. They also diffuse the brightness of LEDs pretty dramatically. Still, if you can get over the price they do exactly say.

Perfect diffusion of the leds using 60/mQuality of the materials are really good10 out of 10

I have lots of different defusers around my house. I needed some black ones for my garden lighting and purchased these. They are far far better than any of the other defusers they turned my rgbic 60leds into a neon strip there are no gaps in the leds

1. First things first, this doesn’t give a neon effect. 2. Second, it doesn’t fit a hue lightstrip. Force fitting spoilt one of my lightstripsNot fit for purpose if you are intending to use it with and for the above two points

Wish it cane with corners as well as it would have just finnished it off nicely