AVV Wall Sconces Set of Two, Wall Lamp Plug in with On/Off Switch, 2700K 4000K 5000K Selectable, Wall Lights for Bedroom, Living Room, Wall Decor for Bedroom, Fabric Linen Lamp Shades

Needed good light for dark rooms at lake cabin. These lights provide that! Light weight- hang well on paneled walls. The three different types of lighting is pretty cool too!

We've all been there. You're in a college dorm, or an apartment, or a house, and you can't drill holes. But you hate the ceiling lighting, probably because it's overly harsh and bright and not cozy at all.If you want to put up a wall sconce without drilling holes, this is the one. Here's how you do it.You will need:One [1] set of these sconcesEight [8] 3M command strips, rated for 5 lbsA sewing needle and threadThe command strips are rated for 5 lbs. I used 4 strips for each sconce and distributed them evenly in each corner of the back. Is it overkill? Yes. But I wanted them on securely. You can use fewer if you're inclined to.Before we begin, be aware that command strips do NOT work if your wall is painted. It will just fall off the paint and destroy your wall. Read the fine print before you complain that command tape and other similar double-sided wall tape solutions are crap. They're not. You just have the wrong surface for this product. But if your wall is wood, plaster, or concrete, then you will be fine.1. Assemble the sconce. Do NOT attach the silver-grey metal bracket that's used to screw it in, because it adds unnecessary weight and you won't be using it for this project. You just want to assemble the lampshade around the white frame. Install the wire and screw the bulb holder in place, but do NOT put the lightbulb in yet.2. Pick up a command strip. The strip has two sides: one is blue, one is white. The white-papered side is clearly marked for the wall. Peel off the BLUE papered side and stick the command strip onto the back of the sconce. Place four command strips onto the back of each sconce. Make sure you arrange the command strips VERTICALLY, not horizontally, on the sconces. DO NOT REMOVE THE WHITE-PAPERED SIDE YET.3. Take out your needle and thread. Look at the picture I took of the command strip, which I have drawn on with a black sharpie: there is an L-shape in the top left corner and the bottom right corner. This is where you are going to sew the command strip to the lampshade. (The reason we're not stitching the entire command strip is because it will make it almost impossible to remove the paper if we do.) If you look at another one of my pictures, you can see how it looks when sewn on (I used red thread so it's very visible). I recommend doing 4 stitches total, for each corner: 2 stitches down, then 2 stitches to the side.4. When making these stitches, you need to go over each stitch multiple times so that when you rip off the paper, it doesn't rip out the stitches. I reinforced each stitch 3 times before tying it off.5. Now you can rip off the paper. Be aware that as you take off the paper, the corners where the stitches are might not come off/be too firmly stitched down. THAT IS FINE! Leave them! Just take off as much paper as you can.6. Press the sconce to the wall and run your fingers over the back to firmly press the command strips against the wall. When you let go, it should hold.7. Wait 30 minutes before installing the lightbulb. This is because the command strips benefit from time undisturbed to properly bind to the wall. It's also a good sanity check, to make sure that it's actually secured in place. That way, if you did this wrong-- you did the process wrong, or you ignored my warning to make sure that you're using this on the right kind of wall surface-- you won't end up with a shattered lightbulb on the floor. So wait 30 minutes.8. Install the lightbulb. You will have to place the bulb in from above, so you may need a step-stool.9. Plug sconce into the wall.10. Turn it on.Enjoy!

Love these wall lights. Freed up space on my nightstand and really gives out bright light. Would definitely recommend 👍

Really pretty, easy to put together, and works as expected. 2 things I wished: 1. That the cord was connected to the back instead of hanging straight down, but I think I’ve found a solution for that, so that I can run cord hider straight up to the shade, and 2. That the switch was on the lamp instead of the cord. I don’t need the switch since I use Feit WiFi bulbs that I control with their app.

I was skeptical in buying these lamps, but after I got them hung and working, I love them! I have put one on each side of the window behind my couch. To change the brightness of them, you just shut them off, and turn them back on. They were very simple to put together and to hang.

Works as intended

This lamps areGood. Very easy to install but the bad part of this is that when you choose a specific intensity of light, it resets again and again every time you turn it off and back on. Man I really want to return them.

These were perfect for what I needed and the quality seems great. They were easy to put together and they look amazing. I loved them so much that I purchased a second set. Great price as well!