🚴♂️ Light up your ride, own the night!
LOODIKA’s LED Bike Wheel Lights feature 6 ultra-bright, waterproof strips with 9 vibrant color modes and smart vibration sensing that auto-activates the lights when you ride. Powered by included AAA batteries lasting up to 48 hours, these easy-to-install spoke lights fit most bike wheels (16-29 inches) and enhance 360° visibility for safer, stylish nighttime cycling. Packaged as a perfect gift for all ages.
Brand | LOODIKA |
Color | Color Changing 2 Wheel pack |
Form Factor | Strip |
Recommended Uses For Product | Enhancing safety and visibility during bicycle rides, particularly during nighttime or low-light conditions |
Auto Part Position | Front |
Included Components | LED and Battery |
Special Feature | Waterproof |
Item Weight | 100 Grams |
Water Resistance Level | Waterproof |
Remote Control Included? | No |
Number of Pieces | 2 |
Connectivity Technology | Bluetooth |
Manufacturer | Loodika |
Item Package Dimensions L x W x H | 5.98 x 2.91 x 1.65 inches |
Package Weight | 0.19 Kilograms |
Brand Name | LOODIKA |
Warranty Description | 1 year |
Model Name | Bike wheel lights 6 packs |
Suggested Users | Girls boys Men Women |
Number of Items | 6 |
Size | 3.1*6.7cm |
D**G
Seem Very Good
Installation: pull the loop up where you need it and then push the battery pack through. Don’t try to stretch the loop over the battery pack while holding the battery pack in place. You will need zip ties or tape, the clips on the edge of the light strips will not last. That said, I actually love these lights. They function as described. The entire wheel lights up with fairly complete coverage at a fairly low speed. You can opt for solid, flashing, or changing fancy-pants patterns—something for everyone. If they fail in a short period of time, I will change my review, but I feel like these lights are the best option for night riding.
S**.
A Better Option Than All Those "Thread it Through the Spokes" solutions.
My kids are .. dangerous. They're prone to stepping into traffic, riding their bikes into traffic and somehow finding traffic where there isn't any traffic. In an effort to try to keep them alive, and satiate the wife's need for "safety", I found these. Well, first I found those other ones that wrap in and out of the spokes and, like any good father, I wasted two hours of my life installing them on four wheels/two bikes, only to have the kids break them the first time they hung them on my (also purchased and reviewed on Amazon) wall mount bike racks. Y'know the ones that hold the front wheel?Anyhow, those were terrible. It actually took me longer to remove the old ones (with a pair of wire cutters because there's NO WAY I'm going to waste any more time with those) than to install these. At first, they seemed to be fighting me. They weren't interested in going on the spokes but, after I got the hang of it, I could have created a pretty solid bit of YouTube content with a "how to" video. I'm that good.So, go ahead, buy these and stop looking at the ones that go all the way around the wheels. You're welcome.
J**T
They work.
1/20/23I only did about 15 miles with these and so far I've had no issues. For the price, you get 1 set for each wheel. There are 9 colors and 4 settings as far as I can tell. You can set each wheel on 1 solid color, 1 blinking color, multi-color blinking(fast), and multi-color blinking(slow). You can set the front wheel solid and the rear wheel blinking and vice versa. You press and hold the power button for 2 sec to turn them on/off. When you leave the bike stationary for about 2 minutes, the lights turn off automatically. When you move the bike again, they come back on. Or you can use the power button to make sure they stay off. Each set requires 3 AAA batteries for a total of 6 which are all included when you buy.Cons: I couldn't find the instructional video and the lights can be a bit difficult to install especially the battery unit but once you get it on everything stays in place. I ended up using a thin black strip of electrical tape to hold one of the lights in place since it seemed to be too loose on the spoke. The black tape blends in nicely and doesn't affect the light.Overall I'm very satisfied with these lights. They're very stylish and I hope they last a long time.
D**D
Not what I ordered at all
These lights are smaller and the mounting points are different. If I was ordering this, I wouldn't complain but I have 27.5" wheels and these are even smaller than what is pictured. I also don't appreciate getting sent a product I didn't request so I returned them.
B**W
Looks great! Great design!
I live in a building that bikes need to be hung on a hook. So lights that wrap around the rim of the wheel would be damaged. This design is 3 sticks that are attached to the spokes. Perfect design when you need to hang your bike on a hook on its wheel. They look great, nice choice of colors.The design is robust. The installation required a lot of pushing on the LED area, I was VERY worried I damaged them during installation. Nope, they work perfectly. Well designed for durability!!!!!!!Edit update: I dropped it one star down to 4 stars. I bought 2 sets (2 bikes, 4 wheels). One unit the blue color stopped working, and some of the yellow is beginning to fail. However, I love them and I will likely order another of the same. I got a solid six months use before the failure.
A**R
SE Bigger Ripper (29er)
The media could not be loaded. I’m officially a “night rider” and ready for the evening BMX ride outs. These lights are amazing, very bright and easy to install…mix these with the “WheelBrightz” lights and you’re golden.Only gripe I really have is I wish the batteries were rechargeable or the battery pack itself was a usb situation but to be fair, its everything I need and wanted.
J**Y
Wheel lights
Not bright at all needs a bigger power pack 3 AAA batteries aren't enough to make them bright
F**H
Fake Advertising
The photos of this on the bike show a long strip with 7 LED's that covers most of the spoke. In actuality, you get a short strip with 6 LED's that covers maybe half of a spoke. Like all these Chinese products that use a rubber strap to secure it, the strap will disintegrate in the not too distant future. A design change needed would be to have the wire for each LED stick come directly from the battery unit rather than being daisy-chained together in a long string. This would make it safer and facilitate installation. Also, a more permanent method of mounting would be nice. On the bright side (pun intended) the lights are very visible and pretty.
Trustpilot
1 week ago
1 week ago