CZC AUTO12V LED Submersible Left and Right Trailer Lights Stop Tail Turn Signal Lights for Under 80 Inch Boat Trailer Truck RV Marine-Replacement for Your Incandescent Bulb Units

These lights were easy to install and are bright and visible. I think the price is good too.

I needed a replacement for a broken light and sets were $50 in the autoparts store. This works great and is a great price.

I installed these on my 5x8 utility trailer. Installing was easy and quick. Look nice and have a sleek profile. I will see how the life of them holds up .

I installed these on my utility trailer after the previous light casing broke. I actually find their thin depth quite helpful because they are not as easy to hit with other objects as I shuffle things around my garage.The lights came with everything I needed EXCEPT two more grey wire nuts. Each light has three wires two wires are ready to attach to other copper and CZC provides two pairs of grey wire nuts for each light. My issue is that my white wires connect directly to other wires also (I am not grounding them on the trailer frame). Fortunately, I did have two more proper wire nuts on hand to attach the wires after I snipped off the other attached hardware.My other issue is the flimsy white box these were packaged in. The box hardly survived my handling around the house and garage before the installation. There is no labeling on the box, so if you plan to replace just one trailer light (like I have don so far) there is nothing on the box to help you remember what is in it.Those issues were small details, so I only knock one star off for both these things. Overall, I am pleased with my purchase and the value of these lights.The wires were a generous length.

My favorite characteristic of these lights is the slim depth profile. Less plastic exposed to get cracked. My original set were/are installed on a low profile utility trailer, since sometime during 2023. To me, the LEDs are correctly bright, even the small side one which I can see from the mirror at night. Despite the subjected road impacts common especially on trailers and longer work trucks, only recently on one of the lights 2 of the leds got weak. They are sealed units, even with the skills, it probably is not cost feasible to attempt repair. Though never backed into the river, they have been dunked under water and road spray with never a problem. I recently purchased several more sets to upgrade a couple other trailers, and yes replace one of the original ones that I had finally crack the side lens off.

Easy hook up for my boat trailer. Nice bright lights and waterproof. Great price.

I'm basing this review on my 1998 Ford Explorer and a cheap 8ft utility trailer with standard 1157 bulbs.I did NOT need to install resistors with this CZC LED light. This is important if you pull your trailer with an older model vehicle. Since LED lights require less current than standard halogen bulbs, some brands require resistors to prevent hyper (super fast) blinking when used with an old car. Thank you, CZC for a product that seems to avoid that problem. These lights very easy to install, because they matched up perfectly with the holes used by my old trailer lights. Actually, I did not even need to drill separate holes for the ground wires; my entire trailer is GROUNDED, so I simply attached the ground wires to the mounting bolts. IMPORTANT: check your trailer wiring BEFORE ordering this item. This kit consists only of two lights with short wires and mounting hardware. If you need to replace faulty wiring and side lights, CZC offers a complete kit for about ten bucks more. If your installation fails, most likely the problem is because your trailer is not properly grounded. Ground wire needs to be in direct contact with Bare metal (not rust, paint, plastic, carpet, wood, etc.) The white wire coming out of your harness is the Ground. Make sure it is screwed into a metal part of your trailer. The brown wire wires are your tail lights; both left/right should be lit when headlights are on. The green wire on your trailer operates the turn signals on the starboard (right) tail light. The yellow wire operates the port (left) side. The CZC light fixture has two white wires. The white wire with the "O" ring is the ground; secure it to the mounting bolt with a nut. The other white wire attaches to the appropriate blinker wire. CZC used white instead of green or yellow because the light can be mounted either port or starboard to illuminate your license plate. Trust me, this will make sense when you do the install. Again, use a test light or volt meter to insure you are getting ample current through your trailer wire system before installing lights. Old corroded wire tips might need to be snipped and restripped before connecting to the new fixtures. Excess wiring should be secured with zip ties to prevent dangling. Wow, these CZC lights are bright! Easy to see turn/brake signals in broad daylight. Submersible.

The media could not be loaded. I bought these to replace some broken, old, antiquated, bulb style tail lights. I was surprised at how thin they were, that’s not a bad thing. They fit perfectly and worked great. Easy to install. This is now the nicest part of my old trailer. it’s hard to beat this price for how nice they look and work. I would absolutely buy these again next time I back into something and destroy these.

excellent lights - easy install - no hassle

Lights are super "bright , and all hardware was included +wiring instructions making the installation very easy. Would recommend this product.

wow it is really bright

Easy to install. The lights are for good visibility. Great price. Would buy again. Recommended.

These LED lights were used on a boat trailer, not expensive and do the job. Time will tell if they keep working.