90oz WildSide+ Jar for Blendtec Blenders, replace 570 575 625 650 725 759 800 825 885 etc, wide compatible with Classic/Designer/Professional/Commercial Series Container Pitcher Cup

This is the perfect size for everyday use. We needed another one for inbetween washing. Works well with our blendtec 575

This non-oem replacement is very low quality. To begin with, it is shorter than the original container, and when you close the lid of the blender, it does not press the lid down on this to help seal it. If you use it at anything above a low-medium speed, whatever liquid you have in the blender ends up coming out the center cap. That's assuming, of course, that you can get this to connect to the base of your blender. I have the Blendtec 800 professional, and it took me several tries to get this container to mount to the base. This is because the splines on the bottom do not mate up easily with the female portion that is part of the blender. Each time I tried to use it, I had to lift the blender container off and turn the blade shaft on the bottom of it slightly, to try to get it to interlock with the blender base. The splines should have been machined with a rounded edge that would allow it to shift slightly as you put it onto the blender. Once you do that, you can actually turn the blender on, and discover that this vibrates and rocks side to side significantly even on lower speeds. I suspect that the main blade shaft was either machined improperly, or somehow got bent, because even if I opened the lid of the blender and put my hand on top of this, it's still tried to rock. Now, once the blender is running, this container causes the motor to drag down and vary speed while in operation, without ever changing the speed on the blender. This indicates to me that it has a very cheap thrust bearing, which coupled with an improperly machined shaft, is putting excess stress on the motor. I gave it a solid test trial of three different uses and got the same results. I would avoid this and spend the extra money on the factory replacement.

The Jar does fit over the mixer but i did not feel comfortable leaving it on the mixer and walking away as its not a snug fit like the Blendtec. Also it appears that the blades can be changed on this jug at a later time.However for the price point of view, they should have included 2 blades and instructions on how to replace it. The quality of mixing is the same. I would have given it 5 stars if it included an extra blade and if the fittings were tighter. Updated - increased the ratings for their superb customer service.

I am happy to find this replacement jar for my blender because it saved me a lot of money instead of buying OEM or a whole new blender.

I like the size and shape of the canister but it fits loosely on the Blentec base. Other than that, it was worth the cost.

Eastfune made a 90 ounce WildSide+ replacement jar that's cheaper than the OEM version. This in general is a good thing. However, I think that Eastfune missed opportunities to really make this blender jar a great one.First, the jar. The jar has all the same dimensions of the WildSide+ OEM jar. However, as compared with the OEM in the pictures, the replacement jar suffers from slightly off oz measurements--OEM marks 48 oz where the replacement marks 50 oz. The metric side has no disparity in measurement lines.Additionally, the Imperial vs Metric measurements are on opposite walls from between the OEM and replacement (see pics).Second, the blade. The OEM blade is a powerful/thick 2-bladed metal piece, capped with a low-profile metal piece. The replacement is a 4-bladed thinner metal piece secured by a nut. At first this might seem like an improvement, but it's not.Third, the blending. Due to the 4-bladed metal blend piece, the flow of liquids is quite a bit choppier. Strangely it does not do as well as the OEM 2-bladed metal blender on leafy or solid items being added to the jar, often leaving chunks of ice and or spinach. Additionally, the whirring of the 4-bladed blender is 2x as loud as the OEM.Last, the lid. The replacement lid is VERY secure and offers a much wider top window opening. The replacement lid also fits the OEM jar, and the OEM lid fits the replacement jar. This was the best part of the Eastfune jar!Overall, is this a worthy successor to the OEM WildSide+ blending jar? Yes and no. The cost and the lid are great, but the metal blender's worse and louder performance than the OEM leaves me with the urge to spend a little more for quality. Is it a good budget item? Yes. I recommend, but only if you like what this offers--it is NOT a 1-for-1 replacement for an OEM WildSide+ blending jar.

It cracked last night during use leaving huge mess all over the countertop. I just had it less than 5 months! Our blendtec jar lasted 8 yrs. Too bad because I really like the blade on this better. Good luck trying to contact the seller!

Seems to go good it is loose and wobbles but havent had a problem now for a month