CORSAIR Nautilus 360 RS ARGB Liquid CPU Cooler – 360mm AIO – Low-Noise – Direct Motherboard Connection – Daisy-Chain – Intel LGA 1851/1700, AMD AM5/AM4 – 3X RS120 ARGB Fans Included – White

This is hands down the best AIO I've ever used. It's extremely simple and easy to set up only taking about 5 minutes to install. The design is so simple that Corsair doesn't include instructions, which I can't complain about because you really don't need them for this unit. The fans, RGB, and pump are all entirely controlled by your motherboard which is AMAZING coming from two Corsair coolers that used the commander core and the ICUE link. I had two H150i AIOs that I got rid of because of the horrible ICUE software that among other issues, wouldn't allow you to manually control the pump in any way. The ICUE software forced me to run the H150i pumps at very high rpm even on the "silent" setting which made an annoying whine whenever the PC was running. For the Nautilus, this is not the case. I can control the pump speed entirely by my motherboard and set it to whatever I want no ICUE needed, THANK YOU CORSAIR. In addition, I was easily able to mount the ICUE link fans from my old radiator to this one because the tubes on this rad are very close together and leave a lot of room on the edge of the cooler for cables and mounting. The Nautilus keeps my 7900x idling around 45-65C and under 85C when gaming or other stressful loads. It's extremely quiet and the pump runs dead silent at 50% usage which is what I set it to. The RGB on the pump looks really neat inside my 5000D and I honestly don't miss the LCD displays from my old H150i's much with this one. The cooling and noise performance of the Nautilus is very strong and I would highly recommend this cooler to anyone using a modern high-end CPU.

I got this for my new system that is an AM5 platform. I had an H-100 original on my old system from like 10 years ago and it was flawless, never failed and was running nearly 24/7 since I built it. However I decided to get another brand this time and what a mistake. It was a thermaltake and unfortunately it used the AMD style 2 point mounting solution that really is for air coolers. needless to say i was having cooling issues and nearly overheated my new processor due to poor contact. You really can't go wrong with corsair as they have standoffs that replace the AMD plastic clips and converts it to a 4 point mount. There may be other brands that do this but definitely thermaltake does not. Corsair is my AIO of choice now and won't even consider another. This thing is keeping my processor between 35-45c at idle and has not once gone past 75c while playing marvel rivals or fortnite.

This Corsair AIO cooler uses standard connectors, eliminating the need for a proprietary hub (and allowing easy substitution of fans, if desired). The pump connects to the motherboard at all four corners, making it MUCH easier to install than most of its competitors. I tried a couple of other brands first, and the two-point retention mechanisms allowed the pump to slide around during installation, making my paste pattern much less effective. The Corsair AIO dropped my idle temps by 8 degrees Celsius.

Works great and was easy to install. Just don’t forget about the extension cords it has in the box for both the rgb and power because it’s crazy hard to connect each without it. It looks great and is quiet. The fit was perfect for my atx case. And the cooling keeps my pc to around 37 degrees

I’m not a gamer, but I run my PCs 24/7/365. When it was time to retire my current box, I went through the usual process of selecting the next batch of components. My preferences in a CPU cooler are simple — big radiator, no lights, and no software. My last box ran flawlessly for years using a Corsair cooler, so this seems like a no-brainer.And mostly, it was. This has to be one of the more annoyingly packaged components I’ve ever purchased. The hardware and fans come in these little paper envelopes; I get the environmental consciousness, but could I please have a reusable bag, because I’m not using all the hardware and would like to keep the stuff I don’t use? Also, give me a one page quick start guide. I’ve done this before and I don’t need a 50-page manual. But I don’t want to scan a QR code on the side of the box and read stuff on my phone just to make sure there’s nothing new since the last time I installed one of these things.Speaking of installation, I put my cooler in a Lian Li Lancool 216 case, which I cannot recommend highly enough. The case has multiple options for liquid cooling, depending on the size of the radiator. I mounted mine in the top, opting to keep the front- and rear-mounted 160mm fans for additional airflow. The radiator fit easily, although I did have to put the hoses toward the front of the case in order to fit the radiator over the edge of the rear case fan. The radiator fits easily and the provided hardware, once it’s out of the stupid little bags, is good quality. The backing plate is nicely machined and fit perfectly on my MSI motherboard. The pump attaches securely with four threaded standoffs and spring-loaded thumbscrews.Remember I mentioned the directions that you’re pointed to with the QR code? I think they messed up in one area. The fans are daisy-chained together so that they only use one PWM connection. Corsair suggests that you mount the fans to the radiator before mounting the radiator. For me, it was easier to mount the radiator and then lay out how I wanted to install the fans. This way I could make sure that I had the fans in the best orientation to keep the fan wiring short and out of the way.Overall. I think this is another solid product from Corsair. For the new box I went with thermal efficiency over raw power and selected a Core Ultra 7 CPU. I could probably run it on air cooling if I had to, unlike the previous i7 which gets quite a bit hotter. With the Corsair cooler, CPU temps should stay pretty low; I haven’t exercised the box too much yet (still moving apps and whatnot) but so far CPU temps have been quite low. And it’s been pretty quiet as well. Other than the packaging and installation annoyances, it’s been good.

I've had it for several months in my new system and it's been super nice and cool. Highly recommend for sleek all black builds.

Producto de calidad, buen diseño enfría mucho mi procesador incluso a toda capacidad llegó mi procesador a 24 grados centígrados

It has kept my Rig cool and does not overheat its amazing I would recommend this item