Lutron Ariadni/Toggler LED+ Dimmer Light Switch for Dimmable LED, Halogen and Incandescent Dimmer Switch, 150W, Single-Pole/3-Way, AYCL-153P-WH, White

I had recently replaced an old 2-U fluorescent with a Lithonia CPANL 2x2 and found it to be a bit too bright. While this dimmer isn't listed as compatible by either Lutron or Lithonia, other LED+ family dimmers are listed.Pros:- The "scan the QR to get install instructions" is the best I've seen. There is a simple wizard to navigate based on whether its 1-gang or multi-gang and single pole or 3-way. Its short, to the point, and large enough to easily see/understand on a small phone screen. Its better than Ikea assembly pictograms as it has actual .. instructions.- Wide dim range with separate toggle, works with existing/regular switchplates.- Installed in literally 10 minutes in a 3-way single gang.- Dims the CPANL down to almost nothing and can be trimmed all the way down and light still turns on (a couple seconds delay) with no flicker.- No buzzing noises from dimmer or light.Cons:- 150W LED limit is a bit low. However it should work for most retrofit uses because 150W LED replaces 1000-1500W of incandescent. Larger loads in new construction should probably use 0-10V dimming.

The switch was easy to install and feels and looks pretty sturdy. This is the first time I've bought this style of dimmer and I'm happy with how well it works. I especially like the ability to adjust the low end dimming so the lowest setting still allows for a slight glow from my LED dimmable bulbs. There is no flicker at the lowest setting - it functions extremely well. It has been very consistent with the dimming levels each time I turn it on. It's a good switch and worth the price.

I've used this in an overhead kitchen fixture, and in a bathroom fixture where I wanted to be able to dim the main lights at night, and it works well. They have added a QR code to watch an install video to make sure you can wire it in. You should have basic electrical skills before doing this; if you do not have such skills, I would strongly recommend you search out some youtube videos on household wiring and installing switches prior to purchasing this. There is also a small blue adjustment range toggle to adjust the "range" of dimming on the main face of the switch. Be sure to use this prior to putting a faceplate back on the switch to see the trigger point where your LED bulbs will activate; some don't come on if the voltage is too low. Also, if dimming LED bulbs, be sure they are "dimmer rated", or you could have negative effects like visible strobing or overheating. If you are unsure if the bulbs are dimmer rated, then perhaps consider getting new ones that you know are, and moving the old bulbs to a fixture that will never use a dimmer.

When purchasing electrical items for your home you don't want to risk buying cheap, off brand junk for reasons that should be evident. These dimmers are from a known manufacturer of quality electric products. They are easy for DIY installation if you follow the directions. Most importantly, ALWAYS MAKE CERTAIN POWER IS OFF ON THE CIRCUIT YOUR WORKING ON!! It's simply enough to turn off the correct breaker. My only very minor complaint is that the dimmer slide is small for my huge hands but it works well. The price is good and shipping is quick.

Works perfectly, no buzzing, wide dimming range and I love the precision adjustment it allows for the lower dimming range. It was easy to install and just works. I also like that it fits in the existing cover and is not obtrusive. If I need another, I'll get one of these.If you have difficulty with small switches though, it's not for you. Ex. I wouldn't get these for someone with arthritis. The sliding switch is small and probably would be hard for them if they had to move it a lot.

Worked perfectly! Beware you may have to clip off the extra metal flaps at the edges if you are installing 2 right next to each other on a double switch. You can do this really easily with a wire cutter.

Easy install works perfectly

The media could not be loaded. Very simple installation and fits perfectly with my existing switch plate. I’m not sure why some people are complaining about the dimmer switch as if they weren’t expecting it to be as small as it is. This was my main concern before buying because my hands and fingers are fairly large. But as you can see in the video, I can work it just fine.The build quality and look and feel of the switch is about what you’d expect for $20. Dimming speed is as fast as you move it and the brightness will go to the max of your bulbs. Very happy with this purchase and will buy another one in the near future.